Hello All,
web service was unable to ping in SOA manager
↧
Web service unable to ping from soa manager
↧
No data found matching the given filter criteria for selected analysis type for the given time frame.
Hi Friends,
When I execute the key figure variant i got the below error for the selected time frame. But its working when i choose the older dates as time frame.
No data found matching the given filter criteria for selected analysis type for the given time frame.
Please refer the attachment for more clarifications and suggest to fix the same.
Thanks & regards,
Sathes
↧
↧
Solution Manager 7.1 SP14 upgrade - SPAM error IMPORT_PROPER Phase
Dear SAP Experts,
I am currently working on Solution Manager 7.1 SP 14 upgrade and I am stuck with SPAM in IMPORT_Proper Phase with the below logs:
Please suggest.
Thanks and Regards,
Bhargavi.
↧
Technical monitoring- Setup Status Coming RED
Hi,
For my Particular SID Setup Status is coming RED particularly for Instaces :
tried : Reassigning the Default- Didn't Worked
Remove monitoring And Assign then Also Didn't Worked.
Re Sync LMDB and MSC Then also didn't worked.
Can anyone let me know the how to remove it.
Thanks in Advance For the help .
Regards,
Shashank Sahu
↧
MPT>100%, processing delay should be filled automatically
Hello,
In incident management If MPT exceeds 100%, then processing delay in text field should be filled automatically as 'processing is delayed because MPT has been exceeded'.
Could someone help me with a step-by-step guide to having this work?
↧
↧
Errors raised during Event Calculation
Hi,
We are receiving this alert after support pack upgrade in our Solman system. The managed object is Monitoring and Alerting Infrastructure.
I found below notes for related issue.
2032173 - Errors raised during Event Calculation "Propagation of status for category" in SLG1
The error in SLG1:
1952450 - Short dump when handling metric variants
1822982 - How to detemine Managed Object ID in SLG1 in Technical Monitoring
Did anyone encountered same issue and suggest the solution for this?
Thanks
Neha
↧
EM Failed to start. Local users and Groups realm is misconfigured. Error using new setting for Realm
Hi Guru's,
We have installed Wily Introscope in our Solution Manager Landscape and it was running successfully till now.
But one of Drive Disk space of Server on which Wily Introscope is installed had no space left at all. Due to which the Wily Introscope got shut down. PFB screenshots of logs specifying this details.
We have now created some free space in Solution Manager Drive.
But now when we are trying to restart/start the Wily Introscope we get below message.
I have found one note for action for above error, and it has been applied to but still we have the same issue.
http://solveissue.com/note?id=1958911
Based on above note, Settings were changed and below users are all assigned to E:\usr\sap\CCMS\apmintroscope and the files they have mentioned in the note.
Also there is note which suggests to set the UAC setting to Never Notify, we cannot change this setting.
Can anyone please do the needful.
Thanks,
Rakesh Bhor
↧
What does the EEM status "stop" actually mean?
Hello,
I have noticed that some of our EEM scripts, once loaded on the robot, have a status "Script execution stopped" in the dashboard.
Since it is an Error 104, I could say that's similar to a 104 Java code "Uncaught exception" (which does not help much).
Is anyone able to help us fixing this error, or at least understanding the status? The scripts have been built the same way as others.
↧
Multiple role config keys in one Business role
Hello,
Scenario: Need to configure ITSM (Incident Management) for 2 separate products (ECC support and Mobile apps support). So created two transaction types ZMIN and ZFIN with different set of UI-screen fields. When user tries to create any incident, the system prompts for ZMIN of ZFIN.
Our requirement: During incident creation, the system should display the screen/fields that are configured for the chosen transaction type. We don't want to make the user choose a business role when he log-in. In other words the role-config key (UI screens) should dynamically get chosen based on the transaction type selected while creating the incident.
I have created two business roles for the ZMIN and ZFIN with respective role-config key. The screens and workflows are working absolutely fine when tested individually.
How do i go about achieving this objective. We are on Solution Manager 7.1 SPS 12.
Best Regards,
Prashant
↧
↧
Cross System Object Lock with BW
Hi guys
Does that feature of Solman work with BW objects ? For all versions ? or are there any restrictions ?
I have trouble to find a clear answer as I found that post from early 2015 : https://scn.sap.com/thread/3668554
Thanks
PY
↧
Users.XML file of Introscope Enterprise Manager is Empty
Hello Experts,
Can anyone please help me with the content of users.xml file for Introscope Enterprise Manager. As our users.xml file is blank. Please help us as our Introscope Enterprise Manager is not getting started. And we are getting user related issues. Please do the needful.
Thanks,
Rakesh Bhor
↧
Automatically change message processor field in ITSM
Hello, experts!
Is it possible to automatically change the field message processor when I select a specific status in ITSM?
I'd like to automatically set the message processor with the same value of field notifier when the status "Proposed solution" is chosen.
Note: I have active organizational units and support teams set in PPOMA_CRM, which means that the field support team should also be refreshed when the message processor is changed.
Any help is appreciated.
Kind regards,
Felipe
↧
SUM failed in Step Extraction 5.2 wrong password for user SYSTEM
Hello together,
we want to upgrade our SOLUTION-Manager (7.1) with a SupportPackageStack. After starting the SUM(Version 14 Patchevel 10) the upgrade stopped in step:
5.2 Extraction - Required System Passwords DDIC and DB user SYSTEM
Error message:
ERROR: Password for 'SYSTEM' does not work, please reenter.
The Password is not wrong . I've checked the Connection before on the DATABASE-Server under SQLplus. conn SYSTEM works fine.
I've changed the Password with : alter user SYSTEM identified by <Password>;
Connection is possible with the new Password, but SUM failed.
So what's the Problem. Has anyone an idea?
Best regards,
Mathias Schneider
↧
↧
Mopz Error type CX_SY_MOVE_CAST_ERROR occurred
Dear All,
We are trying to download stack file through Maintenance Optimizer and we are getting below Error Message in steps Select Files of Mopz
An exception with type CX_SY_MOVE_CAST_ERROR occurred, but was neither handled locally, nor declared in raising clause.
We are using Solution Manager 7.1 SP12
and trying to download Stack 16 for SAP ERP 6.0 system.
Kindly let me know if you solution for above issue.
Regards
Veekshith Shetty
↧
Maintenance Planner Issue - Migrate System to S/4 HANA
Hi guys
While executing Maintenance Planner and Planning a conversion to S/4 HANA, Im getting the following message.
I have proceeded to Download Note 2186164 to Solution Manager system, but is still complaining note is not up to date?
Is there a way to force Maintenance Planner to check that note is already applied? This tool is mandatory for planning a Migration to S/4HANA but its full of errors and wrong information regarding systems.
Another error is that MP shows software components in Initial Stack, when in LMDB shows the proper SP Level.
Is there an explanation to this and how to properly sync data between MP and LMDB?
On the Configuration Guide it mentions to upload an XML, but couldnt find any way to do it.
Event after uploading Data from LMDB Screen, Im unable to proceed to the software calculation.
Any help in how to overcome these issues with MP?
Thanks!
↧
sld error in solman
Hi all,
I have an issue with the solution manager upgrade phase, Java component not moved to SLD. After executing of RZ70 t code rfc call sucess and in SLD only abap system there. Nothing found in the java system. I have checked sldcheck transaction gives some error.
Regards
Rajesh
↧
MPT>100%, processing delay should be filled automatically
Hello,
In incident management If MPT exceeds 100%, then processing delay in text field should be filled automatically as 'processing is delayed because MPT has been exceeded'.
Could someone help me with a step-by-step guide to having this work?
↧
↧
What is the difference between BFP and BSR and TQC ?
hi,
I am new to SAP and have learned about Business Scenario Recommandation, Business Function Prediction and Technical Quality Check. So far I have understand that :
BFP = analyse enhancement packages and tells us what could be of use to us
BSR = analyse our current SAP system and gives us recommandation on what to optimize (transaction or streams)
TQC = analyse technical performance of the system and gives technical recommandation (upgrade RAM, disk sstorage...)
Is there more to that, did I get it right ?
↧
ChaRM configuration:project is not activated due to error in TMS domain
Hi Expert,
I am doing charm configuration and stuck while activating project. When I am click check tab in solar_project_admin system through error "Check TMS Domains" and "System overview of project *** ".PFA, screenshot.
I have create landscape test environment with same system with different client like PEC500 -> PEC700 ->PEC810. Please let me know if this type scenario is not possible with charm. PFA, domain configuration screenshot. I am using functionality of Harmonizing RFC as my version is 7.1 SP12.
Any help is appreciated.
Thanks.
Dipesh Gupta
↧
Incident: Priority mapping for SAP OSS
Hello everyone,
we are using SAP solman 7.1 with two instead of the typical three priorities.
Standard priorities are:
- Very high
- High
- Medium
- Low
After customizing we are using:
- High
- Normal
When forwarding an incident with a (for us) normal priority, the OSS is created with the standard SAP priority "High". So I need to do some mapping of the priority values? Is there a setting in customizing or BAdI which can be used to achieve this?
Thanks!
Regards
Tobias
↧