Hi,
Hi
Im trying to connect the solution doc structure to a Rfc in ChaRM. When saving I get this message: Project XXXXXis inconsistent. Im managing to get the structure into the RfC.
It is saved and I can hand it over for validation but the change manager can
I can see under Service message tab that an entry has been created on
The same project is used to handling Transports but it is working fine.
Regards Abhishek |
Hello,
We are running sap solution manager 7.1 :
We have installed the manageed system SAP S/4 HAna on premise 1511 SP0 and would like to patch it to SP01
The problem is that the product version SAP S/4 HANA on PREMISE is not displayed in MOPZ
It tunrs out that the PRoduct version SAP S/4 HANA on PREMISE is not displayed at all in smsy side either.
I suppose that I need to patch/update out solution manager, but could not find any note mentionning the required support package.
Thank you for your help
Regards
Hi all,
I am setting up techmon in solman 7.1
For this I need to monitor a remote MS SQL 2012 database, not running SAP.
The dbacockpit connection is working fine and some monitoring is available already, but
I am getting a whole bunch of the messages in SM21 on solman
SM_EFWK BY 2 Database error 50000 at OPC
SM_EFWK BY 0 > SQL Server blocked access to procedure 'sys.xp_cmdshell' of
SM_EFWK BY 0 > component 'xp_cmdshell' because this component is turned of
SM_EFWK BY 0 > as part of the security configuration for this server. A
SM_EFWK BY 0 > system administrator can enable the use of 'xp_cmdshell' by
SM_EFWK BY 0 > using sp_configure. For more information about enabling
SM_EFWK BY 0 > 'xp_cmdshell', search for 'xp_cmdshell' in SQL Server Books
SM_EFWK BY 0 > Online.
SM_EFWK BY 1 Database error 50000
In the remote SQL db sys.xp_cmdshell is not enabled, and if I look at the security impact, we dont want to enable it.
But I do want to get rid of this overflooding of my SM21
Which metrics use the xp_cmdshell, and by disabling them, will I still be able to monitor the SQL server?
Thanks
Sander van Gemert
Dear Expert Team,
We have one Solution Manager 7.10 , When I start SAP Instance ,In this disp+work.exe (Dispatcher not starting)
When I check then dev_disp , its give below error message.
---------------------------------------------------
trc file: "dev_disp", trc level: 1, release: "720"
---------------------------------------------------
sysno 00
sid SOL
systemid 562 (PC with Windows NT)
relno 7200
patchlevel 0
patchno 401
intno 20020600
make multithreaded, Unicode, 64 bit, optimized
profile \\saprouter\sapmnt\SOL\SYS\profile\SOL_DVEBMGS00_saprouter
pid 3312
kernel runs with dp version 138000(ext=119000) (@(#) DPLIB-INT-VERSION-138000-UC)
length of sys_adm_ext is 588 bytes
*** SWITCH TRC-HIDE on ***
***LOG Q00=> DpSapEnvInit, DPStart (00 3312) [dpxxdisp.c 1320]
shared lib "dw_xml.dll" version 401 successfully loaded
shared lib "dw_xtc.dll" version 401 successfully loaded
shared lib "dw_stl.dll" version 401 successfully loaded
shared lib "dw_gui.dll" version 401 successfully loaded
shared lib "dw_mdm.dll" version 401 successfully loaded
shared lib "dw_rndrt.dll" version 401 successfully loaded
shared lib "dw_abp.dll" version 401 successfully loaded
shared lib "dw_sym.dll" version 401 successfully loaded
shared lib "dw_aci.dll" version 401 successfully loaded
rdisp/softcancel_sequence : -> 0,5,-1
use internal message server connection to port 3900
rdisp/dynamic_wp_check : 1
rdisp/calculateLoadAverage : 1
Tue Feb 09 21:01:03 2016
*** WARNING => DpNetCheck: NiHostToAddr(www.doesnotexist0076.qqq.nxst) took 5 seconds
Tue Feb 09 21:01:07 2016
*** WARNING => DpNetCheck: NiAddrToHost(1.0.0.0) took 4 seconds
***LOG GZZ=> 2 possible network problems detected - check tracefile and adjust the DNS settings [dpxxtool2.c 6438]
MtxInit: 30000 0 0
DpSysAdmExtInit: ABAP is active
DpSysAdmExtInit: VMC (JAVA VM in WP) is not active
DpIPCInit2: write dp-profile-values into sys_adm_ext
DpIPCInit2: start server >saprouter_SOL_00 <
DpShMCreate: sizeof(wp_adm) 54144 (2256)
DpShMCreate: sizeof(tm_adm) 5517056 (27448)
DpShMCreate: sizeof(wp_ca_adm) 64000 (64)
DpShMCreate: sizeof(appc_ca_adm) 64000 (64)
DpCommTableSize: max/headSize/ftSize/tableSize=500/16/1384064/1384080
DpShMCreate: sizeof(comm_adm) 1384080 (2744)
DpSlockTableSize: max/headSize/ftSize/fiSize/tableSize=0/0/0/0/0
DpShMCreate: sizeof(slock_adm) 0 (296)
DpFileTableSize: max/headSize/ftSize/tableSize=0/0/0/0
DpShMCreate: sizeof(file_adm) 0 (80)
DpShMCreate: sizeof(vmc_adm) 0 (2160)
DpShMCreate: sizeof(wall_adm) (41664/42896/64/192)
DpShMCreate: sizeof(gw_adm) 48
DpShMCreate: sizeof(j2ee_adm) 3952
DpShMCreate: SHM_DP_ADM_KEY (addr: 00000000039E0050, size: 7186112)
DpShMCreate: allocated sys_adm at 00000000039E0060
DpShMCreate: allocated wp_adm_list at 00000000039E30B0
DpShMCreate: allocated wp_adm at 00000000039E32A0
DpShMCreate: allocated tm_adm_list at 00000000039F0630
DpShMCreate: allocated tm_adm at 00000000039F0680
DpShMCreate: allocated wp_ca_adm at 0000000003F33590
DpShMCreate: allocated appc_ca_adm at 0000000003F42FA0
DpShMCreate: allocated comm_adm at 0000000003F529B0
DpShMCreate: system runs without slock table
DpShMCreate: system runs without file table
DpShMCreate: allocated vmc_adm_list at 00000000040A4850
DpShMCreate: system runs without vmc_adm
DpShMCreate: allocated gw_adm at 00000000040A4900
DpShMCreate: allocated j2ee_adm at 00000000040A4940
DpShMCreate: allocated ca_info at 00000000040A58C0
DpShMCreate: allocated wall_adm at 00000000040A5950
DpCommAttachTable: attached comm table (header=0000000003F529B0/ft=0000000003F529C0)
DpSysAdmIntInit: initialize sys_adm
rdisp/test_roll : roll strategy is DP_NORMAL_ROLL
dia token check not active (12 token)
MBUF state OFF
DpCommInitTable: init table for 500 entries
Tue Feb 09 21:01:08 2016
DpRqQInit: keep protect_queue / slots_per_queue 0 / 2001 in sys_adm
rdisp/queue_size_check_value : -> on,50,30,40,500,50,500,80
EmInit: MmSetImplementation( 2 ).
MM global diagnostic options set: 0
<ES> client 0 initializing ....
<ES> EsILock: use spinlock for locking
<ES> InitFreeList
<ES> block size is 4096 kByte.
<ES> Info: em/initial_size_MB( 4093MB) not multiple of em/blocksize_KB( 4096KB)
<ES> Info: em/initial_size_MB rounded up to 4096MB
Using implementation view
<EsNT> Using memory model view.
<EsNT> Memory Reset disabled as NT default
<ES> 1023 blocks reserved for free list.
ES initialized.
mm.dump: set maximum dump mem to 96 MB
DpVmcSetActive: set vmc state DP_VMC_NOT_ACTIVE
MPI: dynamic quotas disabled.
MPI init: pipes=4000 buffers=1279 reserved=383 quota=10%
Tue Feb 09 21:01:09 2016
J2EE server info
start = TRUE
state = STARTED
pid = 3216
argv[0] = F:\usr\sap\SOL\DVEBMGS00\exe\jcontrol.EXE
argv[1] = F:\usr\sap\SOL\DVEBMGS00\exe\jcontrol.EXE
argv[2] = pf=\\saprouter\sapmnt\SOL\SYS\profile\SOL_DVEBMGS00_saprouter
argv[3] = -DSAPSTART=1
argv[4] = -DCONNECT_PORT=65000
argv[5] = -DSAPSYSTEM=00
argv[6] = -DSAPSYSTEMNAME=SOL
argv[7] = -DSAPMYNAME=saprouter_SOL_00
argv[8] = -DSAPPROFILE=\\saprouter\sapmnt\SOL\SYS\profile\SOL_DVEBMGS00_saprouter
argv[9] = -DFRFC_FALLBACK=ON
argv[10] = -DFRFC_FALLBACK_HOST=localhost
start_lazy = 0
start_control = SAP J2EE startup framework
DpJ2eeStart: j2ee state = STARTED
Tue Feb 09 21:01:12 2016
rdisp/http_min_wait_dia_wp : 1 -> 1
***LOG CPS=> DpLoopInit, ICU ( 3.4 3.4 4.1) [dpxxdisp.c 1706]
***LOG Q0K=> DpMsAttach, mscon ( saprouter) [dpxxdisp.c 12674]
MBUF state LOADING
DpStartStopMsg: send start message (myname is >saprouter_SOL_00 <)
DpStartStopMsg: start msg sent
CCMS: SemInMgt: Semaphore Management initialized by AlAttachShm_Doublestack.
CCMS: SemInit: Semaphore 38 initialized by AlAttachShm_Doublestack.
CCMS: start to initalize 3.X shared alert area (first segment).
DpJ2eeLogin: j2ee state = CONNECTED
DpMBufHwIdSet: set Hardware-ID
***LOG Q1C=> DpMBufHwIdSet [dpxxmbuf.c 1296]
MBUF state ACTIVE
DpWpBlksLow: max wp blocks in queue is 800 (80 %)
MBUF component UP
DpMsgProcess: 1 server in MBUF
DpAppcBlksLow: max appc blocks in queue is 500 (50 %)
Tue Feb 09 21:01:41 2016
***LOG Q0I=> NiIRead: P=127.0.0.1:49273; L=127.0.0.1:65000: recv (10054: WSAECONNRESET: Connection reset by peer) [nixxi.cpp 5087]
*** ERROR => NiIRead: SiRecv failed for hdl 41/sock 944
(SI_ECONN_BROKEN/10054; I4; ST; P=127.0.0.1:49273; L=127.0.0.1:65000) [nixxi.cpp 5087]
DpJ2eeMsgProcess: j2ee state = CONNECTED (NIECONN_BROKEN)
DpIJ2eeShutdown: send SIGINT to SAP J2EE startup framework (pid=3216)
*** ERROR => DpProcKill: kill failed [dpntdisp.c 397]
DpIJ2eeShutdown: j2ee state = SHUTDOWN
Tue Feb 09 21:01:52 2016
*** ERROR => DpHdlDeadWp: W0 (pid 3684) died (severity=0, status=0) [dpxxwp.c 1727]
*** ERROR => DpHdlDeadWp: W1 (pid 3704) died (severity=0, status=0) [dpxxwp.c 1727]
*** ERROR => DpHdlDeadWp: W2 (pid 3484) died (severity=0, status=0) [dpxxwp.c 1727]
*** ERROR => DpHdlDeadWp: W3 (pid 3200) died (severity=0, status=0) [dpxxwp.c 1727]
*** ERROR => DpHdlDeadWp: W4 (pid 588) died (severity=0, status=0) [dpxxwp.c 1727]
*** ERROR => DpHdlDeadWp: W5 (pid 3560) died (severity=0, status=0) [dpxxwp.c 1727]
*** ERROR => DpHdlDeadWp: W6 (pid 3492) died (severity=0, status=0) [dpxxwp.c 1727]
*** ERROR => DpHdlDeadWp: W7 (pid 1256) died (severity=0, status=0) [dpxxwp.c 1727]
*** ERROR => DpHdlDeadWp: W8 (pid 3664) died (severity=0, status=0) [dpxxwp.c 1727]
*** ERROR => DpHdlDeadWp: W9 (pid 2200) died (severity=0, status=0) [dpxxwp.c 1727]
*** ERROR => DpHdlDeadWp: W10 (pid 2032) died (severity=0, status=0) [dpxxwp.c 1727]
*** ERROR => DpHdlDeadWp: W11 (pid 3712) died (severity=0, status=0) [dpxxwp.c 1727]
*** ERROR => DpHdlDeadWp: W12 (pid 332) died (severity=0, status=0) [dpxxwp.c 1727]
*** ERROR => DpHdlDeadWp: W13 (pid 3440) died (severity=0, status=0) [dpxxwp.c 1727]
*** ERROR => DpHdlDeadWp: W14 (pid 3924) died (severity=0, status=0) [dpxxwp.c 1727]
*** ERROR => DpHdlDeadWp: W15 (pid 4008) died (severity=0, status=0) [dpxxwp.c 1727]
*** ERROR => DpHdlDeadWp: W16 (pid 3524) died (severity=0, status=0) [dpxxwp.c 1727]
*** ERROR => DpHdlDeadWp: W17 (pid 3500) died (severity=0, status=0) [dpxxwp.c 1727]
*** ERROR => DpHdlDeadWp: W18 (pid 2172) died (severity=0, status=0) [dpxxwp.c 1727]
*** ERROR => DpHdlDeadWp: W19 (pid 3112) died (severity=0, status=0) [dpxxwp.c 1727]
*** ERROR => DpHdlDeadWp: W20 (pid 4088) died (severity=0, status=0) [dpxxwp.c 1727]
*** ERROR => DpHdlDeadWp: W21 (pid 944) died (severity=0, status=0) [dpxxwp.c 1727]
*** DP_FATAL_ERROR => DpWPCheck: no more work processes
*** DISPATCHER EMERGENCY SHUTDOWN ***
increase tracelevel of WPs
NiWait: sleep (10000ms) ...
NiISelect: timeout 10000ms
NiISelect: maximum fd=949
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Tue Feb 09 21:02:02 2016
NiISelect: TIMEOUT occured (10000ms)
dump system status
Workprocess Table (long) Tue Feb 09 15:32:02 2016
========================
No Type Pid Status Cause Start Rstr Err Sem Time Program Cl User Action Table
-------------------------------------------------------------------------------------------------------------------------------
0 DIA -1 Ended no no 1 0 0 NO_ACTION
1 DIA -1 Ended no no 1 0 0 NO_ACTION
2 DIA -1 Ended no no 1 0 0 NO_ACTION
3 DIA -1 Ended no no 1 0 0 NO_ACTION
4 DIA -1 Ended no no 1 0 0 NO_ACTION
5 DIA -1 Ended no no 1 0 0 NO_ACTION
6 DIA -1 Ended no no 1 0 0 NO_ACTION
7 DIA -1 Ended no no 1 0 0 NO_ACTION
8 DIA -1 Ended no no 1 0 0 NO_ACTION
9 DIA -1 Ended no no 1 0 0 NO_ACTION
10 DIA -1 Ended no no 1 0 0 NO_ACTION
11 DIA -1 Ended no no 1 0 0 NO_ACTION
12 UPD -1 Ended no no 1 0 0 NO_ACTION
13 ENQ -1 Ended no no 1 0 0 NO_ACTION
14 BTC -1 Ended no no 1 0 0 NO_ACTION
15 BTC -1 Ended no no 1 0 0 NO_ACTION
16 BTC -1 Ended no no 1 0 0 NO_ACTION
17 BTC -1 Ended no no 1 0 0 NO_ACTION
18 BTC -1 Ended no no 1 0 0 NO_ACTION
19 BTC -1 Ended no no 1 0 0 NO_ACTION
20 SPO -1 Ended no no 1 0 0 NO_ACTION
21 UP2 -1 Ended no no 1 0 0 NO_ACTION
Dispatcher Queue Statistics Tue Feb 09 15:32:02 2016
===========================
+------+--------+--------+--------+------------+------------+
| Typ | now | high | max | writes | reads |
+------+--------+--------+--------+------------+------------+
| NOWP | 0 | 2 | 2000 | 6 | 6 |
+------+--------+--------+--------+------------+------------+
| DIA | 4 | 4 | 2000 | 4 | 0 |
+------+--------+--------+--------+------------+------------+
| UPD | 0 | 0 | 2000 | 0 | 0 |
+------+--------+--------+--------+------------+------------+
| ENQ | 0 | 0 | 2000 | 0 | 0 |
+------+--------+--------+--------+------------+------------+
| BTC | 0 | 0 | 2000 | 0 | 0 |
+------+--------+--------+--------+------------+------------+
| SPO | 0 | 0 | 2000 | 0 | 0 |
+------+--------+--------+--------+------------+------------+
| UP2 | 0 | 0 | 2000 | 0 | 0 |
+------+--------+--------+--------+------------+------------+
max_rq_id 9
wake_evt_udp_now 0
wake events total 7, udp 6 ( 85%), shm 1 ( 14%)
since last update total 7, udp 6 ( 85%), shm 1 ( 14%)
DpGetLoadAverage: la1[1] = 0.000000 / -1.000000 %
DpGetLoadAverage: la5[1] = 0.000000 / -1.000000 %
DpGetLoadAverage: la15[1] = 0.044444 / -1.000000 %
Dispatcher Load Statistics
+------+---------+---------+---------+
| Typ | LA1 | LA5 | LA15 |
+------+---------+---------+---------+
| DIA | 0.000 | 0.000 | 0.044 |
+------+---------+---------+---------+
DpGetLoadAverage: la1[2] = 0.000000 / -1.000000 %
DpGetLoadAverage: la5[2] = 0.000000 / -1.000000 %
DpGetLoadAverage: la15[2] = 0.000000 / -1.000000 %
| UPD | 0.000 | 0.000 | 0.000 |
+------+---------+---------+---------+
DpGetLoadAverage: la1[3] = 0.000000 / -1.000000 %
DpGetLoadAverage: la5[3] = 0.000000 / -1.000000 %
DpGetLoadAverage: la15[3] = 0.000000 / -1.000000 %
| ENQ | 0.000 | 0.000 | 0.000 |
+------+---------+---------+---------+
DpGetLoadAverage: la1[4] = 0.000000 / -1.000000 %
DpGetLoadAverage: la5[4] = 0.000000 / -1.000000 %
DpGetLoadAverage: la15[4] = 0.000000 / -1.000000 %
| BTC | 0.000 | 0.000 | 0.000 |
+------+---------+---------+---------+
DpGetLoadAverage: la1[5] = 0.000000 / -1.000000 %
DpGetLoadAverage: la5[5] = 0.000000 / -1.000000 %
DpGetLoadAverage: la15[5] = 0.000000 / -1.000000 %
| SPO | 0.000 | 0.000 | 0.000 |
+------+---------+---------+---------+
DpGetLoadAverage: la1[6] = 0.000000 / -1.000000 %
DpGetLoadAverage: la5[6] = 0.000000 / -1.000000 %
DpGetLoadAverage: la15[6] = 0.000000 / -1.000000 %
| UP2 | 0.000 | 0.000 | 0.000 |
+------+---------+---------+---------+
Dump of tm_adm structure: Tue Feb 09 15:32:02 2016
=========================
Term uid man user term lastop mod wp ta a/i (modes)
RM-T24, U25, , , 21:01:12, M0, W-1, , 1/0
Workprocess Comm. Area Blocks Tue Feb 09 15:32:02 2016
=============================
Slots: 1000, Used: 1, Max: 1
+------+--------------+----------+-------------+
| id | owner | pid | eyecatcher |
+------+--------------+----------+-------------+
| 0 | DISPATCHER | -1 | 0xdeadbeef |
NiWait: sleep (5000ms) ...
NiISelect: timeout 5000ms
NiISelect: maximum fd=949
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Tue Feb 09 21:02:07 2016
NiISelect: TIMEOUT occured (5000ms)
DpHalt: shutdown server >saprouter_SOL_00 < (normal)
DpJ2eeDisableRestart
DpMBufRead: read server list from MBUF (1 entries)
DpMBufMod: name [saprouter_SOL_00 ], types 191 state 3 (0x0 0x0 0x0 0x0)
DpMBufMod: call hooks for event MBUF_DPEVT_DSTATE (5->3)
AdGetSelfIdentRecord: > <
AdCvtRecToExt: opcode 60 (AD_SELFIDENT), ser 0, ex 0, errno 0
AdCallRegisteredCvtToExt: opcode 60
AdCallRegisteredCvtToExt: opcode 60 call 00000001417BB0C0
AdCallRegisteredCvtToExt: opcode 60 exit rc=SAP_O_K
AdCvtRecToExt: opcode 40 (AD_MSBUF), ser 0, ex 0, errno 0
AdCallRegisteredCvtToExt: opcode 40
AdCallRegisteredCvtToExt: opcode 40 call 00000001417BBF50
AdCallRegisteredCvtToExt: opcode 40 exit rc=SAP_O_K
AdCvtRecToExt: opcode 40 (AD_MSBUF), ser 0, ex 0, errno 0
AdCallRegisteredCvtToExt: opcode 40
AdCallRegisteredCvtToExt: opcode 40 call 00000001417BBF50
AdCallRegisteredCvtToExt: opcode 40 exit rc=SAP_O_K
AdCvtRecToExt: opcode 40 (AD_MSBUF), ser 0, ex 0, errno 0
AdCallRegisteredCvtToExt: opcode 40
AdCallRegisteredCvtToExt: opcode 40 call 00000001417BBF50
AdCallRegisteredCvtToExt: opcode 40 exit rc=SAP_O_K
AdCvtRecToExt: opcode 40 (AD_MSBUF), ser 0, ex 0, errno 0
AdCallRegisteredCvtToExt: opcode 40
AdCallRegisteredCvtToExt: opcode 40 call 00000001417BBF50
AdCallRegisteredCvtToExt: opcode 40 exit rc=SAP_O_K
AdCvtRecToExt: opcode 40 (AD_MSBUF), ser 0, ex 0, errno 0
AdCallRegisteredCvtToExt: opcode 40
AdCallRegisteredCvtToExt: opcode 40 call 00000001417BBF50
AdCallRegisteredCvtToExt: opcode 40 exit rc=SAP_O_K
AdCvtRecToExt: opcode 40 (AD_MSBUF), ser 0, ex 0, errno 0
AdCallRegisteredCvtToExt: opcode 40
AdCallRegisteredCvtToExt: opcode 40 call 00000001417BBF50
AdCallRegisteredCvtToExt: opcode 40 exit rc=SAP_O_K
AdCvtRecToExt: opcode 40 (AD_MSBUF), ser 0, ex 0, errno 0
AdCallRegisteredCvtToExt: opcode 40
AdCallRegisteredCvtToExt: opcode 40 call 00000001417BBF50
AdCallRegisteredCvtToExt: opcode 40 exit rc=SAP_O_K
AdCvtRecToExt: opcode 40 (AD_MSBUF), ser 0, ex 0, errno 0
AdCallRegisteredCvtToExt: opcode 40
AdCallRegisteredCvtToExt: opcode 40 call 00000001417BBF50
AdCallRegisteredCvtToExt: opcode 40 exit rc=SAP_O_K
AdCvtRecToExt: opcode 40 (AD_MSBUF), ser 0, ex 0, errno 0
AdCallRegisteredCvtToExt: opcode 40
AdCallRegisteredCvtToExt: opcode 40 call 00000001417BBF50
AdCallRegisteredCvtToExt: opcode 40 exit rc=SAP_O_K
AdCvtRecToExt: opcode 40 (AD_MSBUF), ser 0, ex 0, errno 0
AdCallRegisteredCvtToExt: opcode 40
AdCallRegisteredCvtToExt: opcode 40 call 00000001417BBF50
AdCallRegisteredCvtToExt: opcode 40 exit rc=SAP_O_K
DpWpBlksLow: wp_blks_in_queue/limit/max = 1/800/1000
DpLockWpBlkEx: lock wp ca_blk 1
make DISP owner of wp_ca_blk 1
DpRqIPutIntoQ: put elem in queue DIA, elems=5
DpRqPutIntoQueue: put request into queue (reqtype 1, prio LOW, rq_id 10)
MBUF server state SHUTDOWN
DpModState: change state STARTING -> SHUTDOWN
NiBufSend starting
NiIWrite: hdl 25 sent data (wrt=110,pac=1,MESG_IO)
MsINiWrite: sent 110 bytes
MsIModState: change state to SHUTDOWN
DpModState: change server state from STARTING to SHUTDOWN
DpHalt: switch off Shared memory profiling
ShmProtect( 57, 3 )
ShmProtect(SHM_PROFILE, SHM_PROT_RW
ShmProtect( 57, 1 )
ShmProtect(SHM_PROFILE, SHM_PROT_RD
DpWakeUpWps: wake up all wp's
DpHalt: stop work processes
DpHalt: stop gateway
killing process (2832) (SOFT_KILL)
DpHalt: stop icman
killing process (2872) (SOFT_KILL)
DpHalt: terminate gui connections
send SHUTDOWN to REM TM 24
DpWpBlksLow: wp_blks_in_queue/limit/max = 2/800/1000
DpLockWpBlkEx: lock wp ca_blk 2
return errno (-17) to T24
DpTmSend: errormsg without overhead: use mode 0
NiBufIAlloc: malloc NiBufadm, to 0 bytes
DpTmSend: try to send 14 bytes to T24/M0
NiBufSend starting
NiIWrite: hdl 33 sent data (wrt=14,pac=1,MESG_IO)
REL WP ca_blk 2
set status of T24 to TM_DISCONNECTED
NiBufISelUpdate: new MODE -- (r-) for hdl 33 in set0
SiSelNSet: set events of sock 940 to: ---
NiBufISelRemove: remove hdl 33 from set0
SiSelNRemove: removed sock 940 (pos=4)
SiSelNRemove: removed sock 940
NiSelIRemove: removed hdl 33
DpDelSocketInfo: del info for nihdl 33 (pos/type=4/3)
NiICloseHandle: shutdown and close hdl 33/sock 940
NiBufIClose: clear extension for hdl 33
dp_tm_adm[24].stat = DP_SLOT_FREE
DpGetSchedule: next schedule 1455031932/656000
DpGetSchedule: no schedule found
DpITmSlotRelease: release slot 24
DpListRemove: remove elem 24 from tmadm_inuse_list
DpListRemove: 24 elems in tmadm_inuse_list
DpListInsert: insert elem 24 into tmadm_free_list (at begin)
DpListInsert: 177 elems in tmadm_free_list
DpHalt: wait for end of work processes
DpHalt: wait for end of gateway
[DpProcDied] Process lives (PID:2832 HANDLE:752)
DpHalt: waiting for termination of gateway ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=949
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Tue Feb 09 21:02:08 2016
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:2832 HANDLE:752)
DpHalt: waiting for termination of gateway ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=949
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Tue Feb 09 21:02:09 2016
NiISelect: TIMEOUT occured (1000ms)
*** ERROR => [DpProcDied] Process died (PID:2832 HANDLE:752 rc:0x0) [dpnttool2.c 147]
DpHalt: wait for end of icman
[DpProcDied] Process lives (PID:2872 HANDLE:760)
DpHalt: waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=949
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Tue Feb 09 21:02:10 2016
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:2872 HANDLE:760)
DpHalt: waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=949
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Tue Feb 09 21:02:11 2016
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:2872 HANDLE:760)
DpHalt: waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=949
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Tue Feb 09 21:02:12 2016
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:2872 HANDLE:760)
DpHalt: waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=949
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Tue Feb 09 21:02:13 2016
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:2872 HANDLE:760)
DpHalt: waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=949
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Tue Feb 09 21:02:14 2016
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:2872 HANDLE:760)
DpHalt: waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=949
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Tue Feb 09 21:02:15 2016
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:2872 HANDLE:760)
DpHalt: waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=949
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Tue Feb 09 21:02:16 2016
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:2872 HANDLE:760)
DpHalt: waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=949
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Tue Feb 09 21:02:17 2016
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:2872 HANDLE:760)
DpHalt: waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=949
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Tue Feb 09 21:02:18 2016
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:2872 HANDLE:760)
DpHalt: waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=949
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Tue Feb 09 21:02:19 2016
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:2872 HANDLE:760)
DpHalt: waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=949
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Tue Feb 09 21:02:20 2016
NiISelect: TIMEOUT occured (1000ms)
*** ERROR => [DpProcDied] Process died (PID:2872 HANDLE:760 rc:0x0) [dpnttool2.c 147]
*** ERROR => [DpProcDied] Process died (PID:3216 HANDLE:756 rc:0x42) [dpnttool2.c 147]
DpStartStopMsg: send stop message (myname is >saprouter_SOL_00 <)
DpStartStopMsg: Write AD_STARTSTOP message with type= 0, name=saprouter_SOL_00 , sapsysnr= 0, hostname=saprouter
AdGetSelfIdentRecord: > <
AdCvtRecToExt: opcode 60 (AD_SELFIDENT), ser 0, ex 0, errno 0
AdCallRegisteredCvtToExt: opcode 60
AdCallRegisteredCvtToExt: opcode 60 call 00000001417BB0C0
AdCallRegisteredCvtToExt: opcode 60 exit rc=SAP_O_K
AdCvtRecToExt: opcode 4 (AD_STARTSTOP), ser 0, ex 0, errno 0
AdCallRegisteredCvtToExt: opcode 4
AdCallRegisteredCvtToExt: opcode 4 call 00000001417B6D00
AdCallRegisteredCvtToExt: opcode 4 exit rc=SAP_O_K
DpConvertRequest: net size = 189 bytes
NiBufIAlloc: malloc MSLIB-BUF, to 32110 bytes
NiBufSend starting
NiIWrite: hdl 25 sent data (wrt=562,pac=1,MESG_IO)
MsINiWrite: sent 562 bytes
MsISnd2: send msg (ms hdr/msg 110/452 bytes) to name -, type 4, key -
DpStartStopMsg: stop msg sent
NiBufIAlloc: malloc MSLIB-BUF, to 32110 bytes
NiBufIAlloc: malloc NIBUF-IN, to 32110 bytes
NiIRead: hdl 25 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 25
NiBufReceive starting
MsINiRead: received 274 bytes
MsIReceive: received msg (ms hdr/msg 110/164 bytes), flag 1, from MSG_SERVER , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 25 recv would block (errno=EAGAIN)
NiIRead: read for hdl 25 timed out (0ms)
DpHalt: more messages from the message server
DpHalt: send keepalive to synchronize with the message server
NiBufSend starting
NiIWrite: hdl 25 sent data (wrt=114,pac=1,MESG_IO)
MsINiWrite: sent 114 bytes
MsISnd2: send msg (ms hdr/msg 110/4 bytes) to name MSG_SERVER, type 0, key -
MsSndName: MS_NOOP ok
Send 4 bytes to MSG_SERVER
NiBufIAlloc: malloc MSLIB-BUF, to 32110 bytes
NiIRead: hdl 25 recv would block (errno=EAGAIN)
NiIPeek: peek successful for hdl 25 (r)
NiBufIAlloc: malloc NIBUF-IN, to 32110 bytes
NiIRead: hdl 25 received data (rcd=114,pac=1,MESG_IO)
NiBufIIn: NIBUF len=114
NiBufIIn: packet complete for hdl 25
NiBufReceive starting
MsINiRead: received 114 bytes
MsIReceive: received msg (ms hdr/msg 110/4 bytes), flag 3, from MSG_SERVER , typ 0, key -
Received 4 bytes from MSG_SERVER
Received opcode MS_NOOP from msg_server, reply MSOP_OK
MsOpReceive: ok
MsISendKeepalive : keepalive sent to message server
NiIRead: hdl 25 recv would block (errno=EAGAIN)
Tue Feb 09 21:02:21 2016
NiIPeek: peek for hdl 25 timed out (r; 1000ms)
NiIRead: read for hdl 25 timed out (1000ms)
DpHalt: no more messages from the message server
DpHalt: sync with message server o.k.
DpHalt: detach from message server
***LOG Q0M=> DpMsDetach, ms_detach () [dpxxdisp.c 13071]
NiBufSend starting
NiIWrite: hdl 25 sent data (wrt=110,pac=1,MESG_IO)
MsINiWrite: sent 110 bytes
MsIDetach: send logout to msg_server (saprouter / 3900)
MsIDetach: call exit function
DpMsShutdownHook called
NiBufISelUpdate: new MODE -- (r-) for hdl 25 in set0
SiSelNSet: set events of sock 776 to: ---
NiBufISelRemove: remove hdl 25 from set0
SiSelNRemove: removed sock 776 (pos=3)
SiSelNRemove: removed sock 776
NiSelIRemove: removed hdl 25
DpDelSocketInfo: del info for nihdl 25 (pos/type=3/4)
MBUF state OFF
AdGetSelfIdentRecord: > <
AdCvtRecToExt: opcode 60 (AD_SELFIDENT), ser 0, ex 0, errno 0
AdCallRegisteredCvtToExt: opcode 60
AdCallRegisteredCvtToExt: opcode 60 call 00000001417BB0C0
AdCallRegisteredCvtToExt: opcode 60 exit rc=SAP_O_K
AdCvtRecToExt: opcode 40 (AD_MSBUF), ser 0, ex 0, errno 0
AdCallRegisteredCvtToExt: opcode 40
AdCallRegisteredCvtToExt: opcode 40 call 00000001417BBF50
AdCallRegisteredCvtToExt: opcode 40 exit rc=SAP_O_K
AdCvtRecToExt: opcode 40 (AD_MSBUF), ser 0, ex 0, errno 0
AdCallRegisteredCvtToExt: opcode 40
AdCallRegisteredCvtToExt: opcode 40 call 00000001417BBF50
AdCallRegisteredCvtToExt: opcode 40 exit rc=SAP_O_K
DpWpBlksLow: wp_blks_in_queue/limit/max = 2/800/1000
DpLockWpBlkEx: lock wp ca_blk 2
make DISP owner of wp_ca_blk 2
DpRqIPutIntoQ: put elem in queue DIA, elems=6
DpRqPutIntoQueue: put request into queue (reqtype 1, prio LOW, rq_id 13)
MBUF component DOWN
NiICloseHandle: shutdown and close hdl 25/sock 776
NiBufIClose: clear extension for hdl 25
MsIDetach: detach MS-system (saprouter / 3900)
DpHalt: cleanup EM
EsCleanup( )
EsCleanup ....
EmCleanup() -> 0
Es2Cleanup: Cleanup ES2
***LOG Q05=> DpHalt, DPStop ( 3312) [dpxxdisp.c 11581]
DpHalt: Good Bye .....
Whats is this error.
Regards.
Hi Everyone, We have implemented ChaRM in SolMan 7.1. Our Project Managers are asking for a report that shows un-released tasks. I can see the transport/task relationship on CD's in Transport management section in ChaRM but cannot find a way to build a report for them. We've looked at /TMWFLOW/REPE70O and /TMWFLOW/TRTASK tables for instance but there are missing entries we see on CDs and not in the tables, and entries in the tables we don't see on the CD. Is there a way we can put this report together so it matches ChaRM?
Hi,
I am setting up wily monitoring for Java stack system. Can you please share with me the respective documents and helpful blogs.
I will appreciate your help.
Thanks in advance
Hi Experts,
I have recently activated Technical Monitoring for one of our ECC System, But it returns Grey status for all Host related metrics.
PFB steps and details of Systems
SAP Solution Manager 7.1 SP11 System, To resolve this issue i have performed below steps as well.But still no luck.
Also the host_profile contains trust connection user and required porttypes details.
6. DAA of Managed system is connected to Solution Manager as well as SLD.
7. DAA is running fine except for the errors and Exceptions that we can see in Agent Administration screen.
Also perfomed below activities:
1. LM- Service upgraded to latest patch,
2. All steps mentioned in KBA 1854525 are performed several times.
3, As per solution mentioned in Note 2142276 , LM Service is already upgraded.
4. As per KBA 2057141, SAP Note 2058556 is applied, After applying this note Basic config, Managed System Config and Assigning Templates steps of Technical Monitoring are also performed, But still have the same error.
Please help me with any suggestion that will help me to get Host details parameters,
Thanks,
Rakesh Bhor
Hi,
We have created two sold to party for our two business entities and also configured two separate org structure. We are using support team auto determination by rule.
We have below requirement in incident management
1. Auto determination of sold to party based on either reported by field or support team field.
2. Atleast one support team member should be assigned by default in a message processor field once the Support Team field is determined.
Need your help to understand the possibilities of above requirements either through standard configuration or development.
Thanks
Currently we are on Solution manager 7.1 Sp12 and have a requirement of configuring jobmon with preceding job condition But the job scheduler is Tidal and the jobs are running there along with preceding condition. We have no connection from solution manager to tidal but the managed systems are connected to tidal . How can be configuration is achieved if in this case , with the preceding job of Job1(main job) vs Job2(preceding job).So any delay in start delay of JOb2 after Job1 finishes we should get an alert also get an alert once job2 ends,
Hi All,
We are planning to integrate one of our ABAP/Technical system on Solution Manager system.
Can anyone please let us know in brief what are all the steps to be considered i doing that?
The system which we are going to integrate is the SAP Bank Analyser system.
Thanks in Advance.
Regards,
R Gowtham Kumar.
Hi experts,
there is one metric in BW-reporting->Incidents which is called "Ratio of New/Closed Tickets".
And to be honest, I've no idea how this gets calculated or what this kpi means.
Maybe somebody know the calculation and can provide it, thank you.
Kind regards
Hi,
I need to extract some data from ChaRM for reporting purpose. I need to have the the ALM CR no and the "Category" section in a report. So is there any table in which the data will be stored.
Or if you can give any list for the standard tables used in ChaRM then it would be helpful.
Regards
Dear experts,
I have enabled the technical Monitoring for HANA DB . In the last step in technical Monitoring -->Reporting Step 7 ->there is nothing displayed.
Is this OK ? There is nothing to activate for HANA DB??
For ABAP and JAVA Systems I activated the SID ID ....
Please advice...
Thank you very much!
Hi Experts,
Currently we are working on a Project to Migrate Two Landscapes under one Solman. The requirement is to integrate ITSM with GRC (by replacing REMEDY ticketing Tool). Is there any possibilities or Hints from your side would be great & helpful.
Dear All,
I am going to install the Solution manager 7.1 with SPS 13 with oracle DB in windows environment. Please help me what are the activities we need to carried out before starting my activity.
Thank you for your help..
Hi, experts.
I am not very experienced with solman, that is why I need your help. My requirement is to display the latest 100 tickets in worklist, if the query is empty. Right now (as per default), the oldest 100 are displayed. Is there a way to do this? I am using Solman 7.1. If the solution requires programming, which it probably does, it won't be a problem for me. Any kind of hint would be appreciated.
Thanks in advance,
Borys
Hi All,
This is my first time, am posting a question. Am not sure if this is the right place,if not, please kindly re-direct me to the correct destination. Here is my question:
I have installed sap hana studio plugins in the eclipse and i have connected to the free trail cloud platform. Now, am trying to create a new package under content folder and i see the new package option is disabled. I assume this could be related to some permissions issue..? Please let me know what am i suppose to do in order to create information views. Please find the screen shot for better understanding.
Thanks for you help in advance,
Dear SAPpers,
User has closed the 1 series request for change before closing/completing the 2 series change document.
Now it does not allow to close the 1 series.
My understanding is firstly, it should not have been possible to close the 1 series as the 2 series is still open.
Please correct me if my understanding is wrong.
If this is standard functionality in SAP, then please suggest how is it possible to close the 2 series change document that is left open now.
Please note: User does not want the 2 series to be WITHDRAWN as the solman is successfully implemented.
System Details
Solution Manager 7.1
SP 12
Thanks & Regards,
Prashanth
Hi CHARM Experts,
we have completed CHARM Configuration in solman 7.1 sp 14, we are not able to find the roles to the user like requester, developer, manager, tester and IT administrator, and in normal change change manager not able to assign the developer in SM_CRM portal, please assist me on this.
Regards,
Hanuman.
Dear Team,
While creating the logical port we are getting RC=500 ping error.Please let me know what to be done.
Regards
Soundarya