Hi All,
I am having a requirement from my client. The clients want to know does CBTA supports NWBC (NetWeaver Business Client). My clients uses NWBC as standard-GUI (general user interface) for every SAP-system like ECC, SRM, SCM CRM, SolMan, eWM, BI, HCM, … etc.
Thanks in Advance
Mohar
Hello Experts,
Can someone guide me on How to use BC sets through Solman 'solar02' configuration tab as i came to know that -
A Business Configuration set (BC Set) is a management tool that allows users to record, save and share customized settings. Customers can either use BC sets provided by SAP (for select industries) or create their own.
I gone through several links but not able to understand exactly that how i am going to record ,save and share customized settings for Business scenarios ,processes and process steps.??
Please Guide me.
Regards,
Abhishek R
Halo,
While trying to configure the solman, I am getting erors (screenshots attached).
Kindly help me out of this issue.
Thanks
Ankit
Fellow Members,
I stumbled upon a strange issue in Landscape Tab of Change Document (Normal/Urgent) in SP10. When I have the retrofit system (Post Processing System) in the project; the Transport Status shows incorrect when the actual transport is done. For example XPL 250 is my Retrofit system, when I create a Urgent Change and import it to QAS system (XPL 200) the Transport status for XPL 250 system too shows "Imported" as seen below;
The actual TMS track is XPL 100 > XPL 200 > XPL 300 >XPL 400 and XPL 250 is Retrofit system.
If I dig into TMS import log of the TR i find it never got imported into XPL 250 (Post Processing System). Then why I am seeing in landscape Tab as imported?
Regards,
Vivek
Hello Sap Solution experts,
I have a requirement concerning the status of messages, together with the possibility to modify the documents. The issue is:
Firstly I must be able to close the message (i.e. Status: Close). The problem is when I put Allowed or Warning, I can close the message, but I am still able to modify the message after the message has been closed.
My requirement is to be able to close the message and not to be able to modify it once it is closed.
The screenshot below is the place where the actions are done:
Thanks for your help.
Regards,
Yovish.
Hi,
I have below query on RBPD.
I have created a Project manually in solar_project_admin & maintained the Business Scenarios, Processes & steps manually in solar01.even I uploaded all the documents for respective nodes.
Now for same managed system I want to Run RBPD, but I dont want to create new project based on RBPD analysis. I want to use the existing project only. Is it possible.
Is it possible to use the existing Bluprint project to update with RBPD analysis.
Regards
PK
The basic error is that during Managed System Configuration of the Java stack of my Solution Manager system -- and for any Java system, for that matter -- in Step 6 "Create Users" I have a persistent error status of "User Not in validity period" for the SAPSUPPORT user. The user already exists, because it was created successfully during the ABAP portion of the Managed System Config. Furthermore, the "Update Existing User" action did successfully assign the three Java roles (SAP_JAVA_NWADMIN_CENTRAL_READONLY, SAP_JAVA_SUPPORT, and SAP-J2EE-ENGINE.SAP_JAVA_SUPPORT). I have confirmed that the SAPSUPPORT user, the SOLMAN_ADMIN user, my own user account, and every other possibly relevant service user account I can think of is active, valid, not locked, etc. Yet, still I cannot get past this error.
This is a SolMan 7.1 sps10 system, so the corrections from Notes 1748202 and/or 1684720 are already in place. Furthermore, I have already created a role with Spml_Read_Action and Spml_Write_Action and assigned it to my own user and SOLMAN_ADMIN, as described in Note 1647157. Every discussion thread or Note I've found in searching indicates these should solve the problem, but I still have the problem.
So, has anyone run into this and resolved it? Or have ideas of where else to look for the mysterious validity period?
Thanks, and best regards,
Matt
Hi,
We are getting warning in 5th step (Configure Automatically) at "Enable System Data Measurement" tab:
The comment showing there is:
In this automatic activity, you set up the CUP scenario, activating the BI content and the extractors.
SAP_SM_BASIC_SETTINGS role is assigned to the user who performs the setup.SAP_SM_BASIC_SETTINGS role is assinged to the RFC user.You cannot perform this activity manually.
Performing the activity automatically, the following changes are made to your system:
Thanks,
Ankit
Hi all,
I would a list of the principals tables linked to the service desk.
Like crm_orderadm_h or crm_order_index........
Can you help me? Thanks.
Hello gurus,
I created a survey in CRM_SURVEY_SUITE.
I do not know how to make the survey display after incident messages has status "closed" and where can I see the results.
I searched in the web for an appropriate information, but I could not find any information or guide on how to do it.
If you know how to do it or find a documentation on how to resolve my issue, please advise me.
Best regards,
Zhanbolat
Hi,
When I am trying to Resync. technical system data from SLD , am able to sync for Satellite system data. But for Solman system getting errors as...
Instance referenced in role PartComponent does not exist: SAP_AppSysInstanceMember.GroupComponent=ref"SAP_ApplicationSystemInstance.CreationClassName=\"SAP_ApplicationSystemInstance\",Name=\"ESM.HostName.saps
Instance referenced in role Dependent does not exist: SAP_J2EEEngineInstanceHost.Antecedent=ref"SAP_ComputerSystem.CreationClassName=\"SAP_ComputerSystem\",Name=\"sapsol\"",Dependent=ref"SAP_J2EEEngineIns
Instance referenced in role Dependent does not exist: SAP_J2EEEngineClusterNodeHost.Antecedent=ref"SAP_ComputerSystem.CreationClassName=\"SAP_ComputerSystem\",Name=\"sapsol\"",Dependent=ref"SAP_J2EEEngine
System Details :
Solution Manager 7.1 on AIX 5.3
Regards ,
Shashi Bhooshan
Hi Experts,
I am new to SAP solution manager. We have 10 business process having the different SD cycles
( 1. Business process: Contract--> Order--> Delivery--> Invoice.
2. Business process: Order--> Delivery--> Invoice. Likewise other business processes have different cycles).
When we filter in TBOM for particular transaction code(example: VF01) the all business processes, which are containing transaction code VF01 should display for automatic execution.
Please give your valuable solution for the same.
Thanks,
Yadagiri. D
Dear Solution Manager experts,
I have been configuring the SLA part of the Incident Management Solution Manager 7.1. SP10.
Everything works fine, except:
My Response Profile where I store durations SRV_RR_DURA and SRV_RF_DURA is getting populated to the Incident Message only partly.
In the message I can see the value (in minutes) from my SRV_RR_DURA (Duration Until Service End) and this is correct. Nevertheless duration that I store in SRV_RR_DURA for the same Response Profile is not getting populated and I get the default SAP value 8 HOUR.
I have checked and the whole configuration seem perfectly fine. I have based my SLA Determination on Service Product and I assigned my Service and Response Profiles to the Service Product INVESTIGATION.
In addition, in my Date Profile I have removed all the Default durations, but I didn't help (yes, it was a desperate try). If both duration values were not populated, than I would jump to the conclusion that something is wrong with the Response Profile Determination. But if half of it works fine, there must be something else.
If anybody is interested, I can share my solutions to some of the problems that I noticed while searching this forum (e.g. how to get the First Reaction Timestamp in the message and similar). As I can see, there is lack of relevant guides and all the missing information I tried to figure out myself since there is nobody to ask in my place.
Best regards,
Kasia
I attach the relevant Printscreens. (I omit Response Profile, believe me, it is configured correct, according to all the guides).
Hello,
I am setting up the monitoring on Solman 7.1 SP10 / Sybase 15.7 for an ERP system.
In the workcenter alet Inbox when i click on the Managed object of the alert ,i am directed to the welcome page of the Managed system.
Is it possible to confgure the system so that the redirecteion would be done to the transaction specified in the aAlert instaead of the welcome page (for the short dump in the case below it should be ST22)?
Thanks for your help,
Hassan
PFA.
Please share your valuable info.
Hi Expert,
we are going to start an upgrade project of our ERP 6.0 system from EHP4 to EHP6 and I'm interested to know if I can use retrofit in order to manage in a structured way the double maintenance during the transition period of the project. My goal is to retrofit the TR created in the maintenance landscape (ERP 6.0 EHP4) to the upgraded development system (ERP 6.0 EHP6). By reading the documentation available in sdn and in the SAP help it seems that this should be feasible but I didn't find a clear statement about the feasibility of this approach. Can any one tell me if retrofit can be used in upgrade project as previously described?
thanks in advance for your collaboration.
BR
g.
Hi All,
I am in process of Basic Configuration in Solution Manager 7.1 SP08. the Tab 7 Maintain System in IBase the below two steps
Create IBase Components for SMSY Systems
Create IBase Components for LMDB Systems
Show an error.
For "Create IBase Components for SMSY Systems" it throws an error as "No Business partner of type organization for customer number XXXXX"
The summary of the step Create IBase Components for SMSY Systems is as below
IBase '1' already exists - Ext. ID 'SOL_MAN_DATA_REP'
IBase component '3362' created - ID. '0000XXXXXX'
No business partner of type organization for customer number XXXXXX
For Create IBase Components for LMDB Systems it has been said that
Activity "Create IBase Components for SMSY Systems" has to finish before this activity. So this should be okay when we execute the SMSY step.
Could any one please advice on this.
Warm Regards,
Sudhakar G
Hi everyone,
I implemented EEM funcionality in SAP Solution Manager 7.1 SP10. I have done all necesary steps (I think so) but I can't activate the SAPGUI option in the step call "configure EEM robots" and so also in the step call "Distribute Script". Anyone can help me?
I checked the next steps:
Reference Images
Regards
Felipe
We are having the problem of old ccms alerts being sent again following the system restart after our monthly Windows updates. We are on Solman 7.1, kernel 720 Rel 40, and using Solman as the CEN for our central monitoring. Sometimes it has repeated alerts that are 2 weeks old, most recently it was alerts from two days prior. These alerts are set up with autoreaction methods to email someone, and so emails are being sent for the old alerts. Has anyone seen this before or know how to prevent this? Thanks.
Dear all,
I just configured a saprouter on a client and it´s working I tested from inside the LAN (telnet to IP and port) but when I tried to connect from home via SAP-GUI I got these error, can someone tell me why? I looks like my firewall is blocking it or not, please check the error details on the screen shot.
Best regards,
Nelson Chamba\