Dear experts,
I ran a successful migration of our Solution Manager 7.01 EhP1 system from our old Win2k3 server to a new Win2k8 server. Therefore some minor changes took place:
- platform change from W2k3 32bit to W2k8 64bit
- Instance number from 02 to 00
- server name changed from imps14 to impvs42
The instance name (SLM) is still the same. The system is running so far but now I tried to apply the profiles in RZ10 and after adapting the profile names, server name and instance number I activated all profiles and now the system did not started. The disp+work.exe stopped after a few seconds.
Then I replaced the instance profile back to the initial one after the migration and the system started, but the disp+work process still is yellow and says: "Running, Message Server connection ok, Dialog Queue time: 0.00 sec, J2EE status info unavailable".
I can login to the abap instance but I cannot login to the java instance. I am as well a little bit confused about which port is used for the http part of the abap stack und on which port the java stack is listening.
The MMC console displays as well the java stack which has the instance number 03 and 2 processes, msg_server.exe and enserver.exe.
I think these are two problems, therefor I'd like to start with the abap stack and profile problem. I will include the profiles, working and not working. If someone could help me in identifying the problem I would be happy.
Here is the default profile: DEFAULT.PFL
#.****************************************************************************************************************************** #.* * #.* Default profile DEFAULT.PFL * #.* * #.* Version = 000009 * #.* Generated by user = DDIC * #.* Generated on = 19.12.2013 , 16:10:22 * #.* * #.****************************************************************************************************************************** SAPSYSTEMNAME = SLM SAPDBHOST = impvs42 rdisp/accept_remote_trace_level = 0 rdisp/sna_gateway = impvs42 rdisp/sna_gw_service = sapgw00 rslg/collect_daemon/listen_port = 37 rslg/collect_daemon/talk_port = 13 rdisp/bufrefmode = sendoff,exeauto ms/server_port_0 = PROT=HTTP, PORT=8100 #----------------------------------------------------------------------- # SAP Message Server for ABAP #----------------------------------------------------------------------- rdisp/mshost = impvs42 rdisp/msserv = sapmsSLM rdisp/msserv_internal = 3900 #----------------------------------------------------------------------- # SAP Central Service Instance for J2EE #----------------------------------------------------------------------- j2ee/scs/host = impvs42 j2ee/scs/system = 03 j2ee/ms/port = 3903 ssf/name = SAPSECULIB login/system_client = 001
Here is the WORKING instance profile: SLM_DVEBMGS00_impvs42
SAPSYSTEMNAME = SLM SAPGLOBALHOST = impvs42 SAPSYSTEM = 00 INSTANCE_NAME = DVEBMGS00 DIR_CT_RUN = $(DIR_EXE_ROOT)\$(OS_UNICODE)\NTAMD64 DIR_EXECUTABLE = $(DIR_INSTANCE)\exe jstartup/trimming_properties = off jstartup/protocol = on jstartup/vm/home = C:\j2sdk1.4.2_38-x64 jstartup/max_caches = 500 jstartup/release = 700 jstartup/instance_properties = $(jstartup/j2ee_properties);$(jstartup/sdm_properties) j2ee/dbdriver = h:\sapdb\programs\runtime\jar\sapdbc.jar rdisp/wp_no_dia = 10 rdisp/wp_no_btc = 3 rdisp/j2ee_start_control = 1 rdisp/j2ee_start = 0 rdisp/j2ee_libpath = $(DIR_EXECUTABLE) exe/j2ee = $(DIR_EXECUTABLE)\jcontrol$(FT_EXE) rdisp/j2ee_timeout = 600 rdisp/frfc_fallback = on icm/HTTP/j2ee_0 = PREFIX=/,HOST=localhost,CONN=0-500,PORT=5$$00 icm/server_port_0 = PROT=HTTP,PORT=80$$ #----------------------------------------------------------------------- # SAP Message Server parameters are set in the DEFAULT.PFL #----------------------------------------------------------------------- ms/server_port_0 = PROT=HTTP,PORT=81$$ rdisp/wp_no_enq = 1 rdisp/wp_no_vb = 1 rdisp/wp_no_vb2 = 1 rdisp/wp_no_spo = 1 rsdb/dbid = SLM dbs/ada/schema = SAPSLM ssl/ssl_lib = $(DIR_EXECUTABLE)$(DIR_SEP)$(FT_DLL_PREFIX)sapcrypto$(FT_DLL) sec/libsapsecu = $(ssl/ssl_lib) ssf/ssfapi_lib = $(ssl/ssl_lib) login/accept_sso2_ticket = 1 login/create_sso2_ticket = 2
And here the not-working version, which is created after activating the working profile in RZ10 (which uses parameters stored in SAP):
#.****************************************************************************************************************************** #.* * #.* Instance profile SLM_DVEBMGS00_IMPVS42 * #.* * #.* Version = 000003 * #.* Generated by user = DDIC * #.* Generated on = 19.12.2013 , 15:47:07 * #.* * #.****************************************************************************************************************************** rdisp/max_wprun_time = 4000 zcsa/system_language = D icm/host_name_full = impvs42.hen.inmediasp.de SAPSYSTEMNAME = SLM INSTANCE_NAME = DVEBMGS00 SAPSYSTEM = 00 rdisp/wp_no_dia = 6 rdisp/wp_no_btc = 3 rdisp/wp_no_vb = 4 rdisp/wp_no_vb2 = 2 rdisp/wp_no_enq = 1 rdisp/wp_no_spo = 1 SAPGLOBALHOST = impvs42 PHYS_MEMSIZE = 1000 DIR_TRANS = F:\usr\sap\trans icm/server_port_0 = PROT=HTTP,PORT=8000 rsdb/dbid = SLM dbs/ada/schema = SAPSLM abap/buffersize = 300000 zcsa/table_buffer_area = 30000128 rtbb/buffer_length = 10000 rsdb/cua/buffersize = 3000 zcsa/presentation_buffer_area = 4400128 rdisp/appc_ca_blk_no = 100 rdisp/wp_ca_blk_no = 300 rsdb/ntab/entrycount = 19977 rsdb/ntab/ftabsize = 30004 login/no_automatic_user_sapstar = 0 rsdb/ntab/irbdsize = 6000 rsdb/ntab/sntabsize = 3000 DIR_ROLL = F:\usr\sap\SLM\DVEBMGS00\data DIR_PAGING = F:\usr\sap\SLM\DVEBMGS00\data DIR_DATA = F:\usr\sap\SLM\DVEBMGS00\data DIR_REORG = F:\usr\sap\SLM\DVEBMGS00\data DIR_TEMP = . DIR_SORTTMP = F:\usr\sap\SLM\DVEBMGS00\data zcsa/installed_languages = ED install/codepage/appl_server = 1100 abap/use_paging = 0 ztta/roll_first = 1024 ztta/roll_area = 2000896 rdisp/ROLL_SHM = 32768 rdisp/ROLL_MAXFS = 32768 rdisp/PG_SHM = 16384 rdisp/PG_MAXFS = 32768 abap/heap_area_dia = 2000683008 abap/heap_area_nondia = 2000683008 abap/heap_area_total = 2000683008 abap/heaplimit = 40894464 abap/swap_reserve = 20971520 ztta/roll_extension = 2000683008 em/initial_size_MB = 1000 em/blocksize_KB = 1024 em/stat_log_size_MB = 20 em/stat_log_timeout = 0 em/address_space_MB = 512 rdisp/elem_per_queue = 2000 ztta/parameter_area = 32000 auth/auth_number_in_userbuffer = 5000 login/create_sso2_ticket = 2 login/accept_sso2_ticket = 1 rsdb/obj/buffersize = 40960
After starting the system with the non-working profile I got following dev_ms trace from msg_server.EXE:
--------------------------------------------------- trc file: "dev_ms", trc level: 1, release: "701" --------------------------------------------------- [Thr 696] Fri Dec 20 12:33:43 2013 [Thr 696] MsSSetTrcLog: trc logging active, max size = 20971520 bytes systemid 562 (PC with Windows NT) relno 7010 patchlevel 0 patchno 183 intno 20020600 make: multithreaded, Unicode, 64 bit, optimized pid 3580 [Thr 696] ***LOG Q01=> MsSInit, MSStart (Msg Server 1 3580) [msxxserv.c 1853] [Thr 696] load acl file = F:\usr\sap\SLM\SYS\global\ms_acl_info.DAT [Thr 696] MsGetOwnIpAddr: my host addresses are : [Thr 696] 1 : [10.2.1.42] impvs42 (HOSTNAME) [Thr 696] 2 : [127.0.0.1] impvs42.hen.inmediasp.de (LOCALHOST) [Thr 696] Fri Dec 20 12:33:44 2013 [Thr 696] MsHttpInit: full qualified hostname = impvs42 [Thr 696] HTTP logging is switch off [Thr 696] set HTTP state to LISTEN [Thr 696] ms/icf_info_server : deleted [Thr 696] *** I listen to port sapmsSLM (3600) *** [Thr 696] *** I listen to internal port 3900 (3900) *** [Thr 696] *** HTTP port 8100 state LISTEN *** [Thr 696] CUSTOMER KEY: >L0194898338< [Thr 696] build version=701.2009.12.02 [Thr 696] Fri Dec 20 12:34:43 2013 [Thr 696] *** ERROR => MsSClientHandle: no server provides service ENQ (4), requested from impvs42_SLM_00 [msxxserv.c 4731]
And this trace from disp+work.EXE which stopped:
--------------------------------------------------- trc file: "dev_disp", trc level: 1, release: "701" --------------------------------------------------- sysno 00 sid SLM systemid 562 (PC with Windows NT) relno 7010 patchlevel 0 patchno 196 intno 20020600 make: multithreaded, Unicode, 64 bit, optimized pid 1316 kernel runs with dp version 246000(ext=110000) (@(#) DPLIB-INT-VERSION-246000-UC) length of sys_adm_ext is 576 bytes *** SWITCH TRC-HIDE on *** ***LOG Q00=> DpSapEnvInit, DPStart (00 1316) [dpxxdisp.c 1364] shared lib "dw_xml.dll" version 196 successfully loaded shared lib "dw_xtc.dll" version 196 successfully loaded shared lib "dw_stl.dll" version 196 successfully loaded shared lib "dw_gui.dll" version 196 successfully loaded shared lib "dw_mdm.dll" version 196 successfully loaded rdisp/softcancel_sequence : -> 0,5,-1 use internal message server connection to port 3900 Fri Dec 20 12:33:48 2013 *** WARNING => DpNetCheck: NiAddrToHost(1.0.0.0) took 4 seconds ***LOG GZZ=> 1 possible network problems detected - check tracefile and adjust the DNS settings [dpxxtool2.c 5551] MtxInit: 30000 0 0 DpSysAdmExtInit: ABAP is active DpSysAdmExtInit: VMC (JAVA VM in WP) is not active DpIPCInit2: start server >impvs42_SLM_00 < DpShMCreate: sizeof(wp_adm) 29792 (1752) DpShMCreate: sizeof(tm_adm) 5912704 (29416) DpShMCreate: sizeof(wp_ca_adm) 24064 (80) DpShMCreate: sizeof(appc_ca_adm) 8000 (80) DpCommTableSize: max/headSize/ftSize/tableSize=500/16/552064/552080 DpShMCreate: sizeof(comm_adm) 552080 (1088) DpSlockTableSize: max/headSize/ftSize/fiSize/tableSize=0/0/0/0/0 DpShMCreate: sizeof(slock_adm) 0 (104) DpFileTableSize: max/headSize/ftSize/tableSize=0/0/0/0 DpShMCreate: sizeof(file_adm) 0 (72) DpShMCreate: sizeof(vmc_adm) 0 (1864) DpShMCreate: sizeof(wall_adm) (41664/36752/64/192) DpShMCreate: sizeof(gw_adm) 48 DpShMCreate: SHM_DP_ADM_KEY (addr: 0000000008430050, size: 6614288) DpShMCreate: allocated sys_adm at 0000000008430050 DpShMCreate: allocated wp_adm at 00000000084322A0 DpShMCreate: allocated tm_adm_list at 0000000008439700 DpShMCreate: allocated tm_adm at 0000000008439760 DpShMCreate: allocated wp_ca_adm at 00000000089DCFE0 DpShMCreate: allocated appc_ca_adm at 00000000089E2DE0 DpShMCreate: allocated comm_adm at 00000000089E4D20 DpShMCreate: system runs without slock table DpShMCreate: system runs without file table DpShMCreate: allocated vmc_adm_list at 0000000008A6B9B0 DpShMCreate: allocated gw_adm at 0000000008A6BA30 DpShMCreate: system runs without vmc_adm DpShMCreate: allocated ca_info at 0000000008A6BA60 DpShMCreate: allocated wall_adm at 0000000008A6BAD0 MBUF state OFF DpCommInitTable: init table for 500 entries DpRqQInit: Parameter rdisp/queue_lock_level = 2 rdisp/queue_size_check_value : -> on,50,30,40,500,50,500,80 ThTaskStatus: rdisp/reset_online_during_debug 0 EmInit: MmSetImplementation( 2 ). MM global diagnostic options set: 0<ES> client 0 initializing ....<ES> EsILock: use spinlock for locking<ES> InitFreeList<ES> block size is 1024 kByte. Using implementation view<EsNT> Using memory model view.<EsNT> Memory Reset disabled as NT default<ES> 999 blocks reserved for free list. ES initialized. mm.dump: set maximum dump mem to 96 MB rdisp/http_min_wait_dia_wp : 1 -> 1 ***LOG CPS=> DpLoopInit, ICU ( 3.0 3.0 4.0.1) [dpxxdisp.c 1759] ***LOG Q0K=> DpMsAttach, mscon ( impvs42) [dpxxdisp.c 12953] DpStartStopMsg: send start message (myname is >impvs42_SLM_00 <) DpStartStopMsg: start msg sent CCMS: Initalized shared memory of size 60000000 for monitoring segment. CCMS: Checking Downtime Configuration of Monitoring Segment. CCMS: start to initalize 3.X shared alert area (first segment). DpMsgAdmin: Set release to 7010, patchlevel 0 MBUF state PREPARED MBUF component UP DpMBufHwIdSet: set Hardware-ID ***LOG Q1C=> DpMBufHwIdSet [dpxxmbuf.c 1048] DpMsgAdmin: Set patchno for this platform to 196 Release check o.K. Fri Dec 20 12:34:28 2013 my types changed after wp death/restart 0xbf --> 0xbe my types changed after wp death/restart 0xbe --> 0xbc my types changed after wp death/restart 0xbc --> 0xb8 my types changed after wp death/restart 0xb8 --> 0xb0 my types changed after wp death/restart 0xb0 --> 0xa0 my types changed after wp death/restart 0xa0 --> 0x80 *** DP_FATAL_ERROR => DpWPCheck: no more work processes *** DISPATCHER EMERGENCY SHUTDOWN *** increase tracelevel of WPs NiWait: sleep (10000ms) ... NiISelect: timeout 10000ms NiISelect: maximum fd=1465 NiISelect: read-mask is NULL NiISelect: write-mask is NULL Fri Dec 20 12:34:38 2013 NiISelect: TIMEOUT occured (10000ms) dump system status Workprocess Table (long) Fri Dec 20 11:34:38 2013 ======================== No Ty. Pid Status Cause Start Err Sem CPU Time Program Cl User Action Table ------------------------------------------------------------------------------------------------------------------------------- 0 DIA 0 Ended no 1 0 0 1 DIA 0 Ended no 1 0 0 2 DIA 0 Ended no 1 0 0 3 DIA 0 Ended no 1 0 0 4 DIA 0 Ended no 1 0 0 5 DIA 0 Ended no 1 0 0 6 UPD 0 Ended no 1 0 0 7 UPD 0 Ended no 1 0 0 8 UPD 0 Ended no 1 0 0 9 UPD 0 Ended no 1 0 0 10 ENQ 0 Ended no 1 0 0 11 BTC 0 Ended no 1 0 0 12 BTC 0 Ended no 1 0 0 13 BTC 0 Ended no 1 0 0 14 SPO 0 Ended no 1 0 0 15 UP2 0 Ended no 1 0 0 16 UP2 0 Ended no 1 0 0 Dispatcher Queue Statistics Fri Dec 20 11:34:38 2013 =========================== +------+--------+--------+--------+--------+--------+ | Typ | now | high | max | writes | reads | +------+--------+--------+--------+--------+--------+ | NOWP | 0 | 0 | 2000 | 0 | 0 | +------+--------+--------+--------+--------+--------+ | DIA | 4 | 4 | 2000 | 4 | 0 | +------+--------+--------+--------+--------+--------+ | UPD | 0 | 0 | 2000 | 0 | 0 | +------+--------+--------+--------+--------+--------+ | ENQ | 0 | 0 | 2000 | 0 | 0 | +------+--------+--------+--------+--------+--------+ | BTC | 0 | 0 | 2000 | 0 | 0 | +------+--------+--------+--------+--------+--------+ | SPO | 0 | 0 | 2000 | 0 | 0 | +------+--------+--------+--------+--------+--------+ | UP2 | 0 | 0 | 2000 | 0 | 0 | +------+--------+--------+--------+--------+--------+ max_rq_id 7 wake_evt_udp_now 0 wake events total 3, udp 2 ( 66%), shm 1 ( 33%) since last update total 3, udp 2 ( 66%), shm 1 ( 33%) Dump of tm_adm structure: Fri Dec 20 11:34:38 2013 ========================= Term uid man user term lastop mod wp ta a/i (modes) Workprocess Comm. Area Blocks Fri Dec 20 11:34:38 2013 ============================= Slots: 300, Used: 1, Max: 1 +------+--------------+----------+-------------+ | id | owner | pid | eyecatcher | +------+--------------+----------+-------------+ | 0 | DISPATCHER | -1 | *WPCAAD000* | NiWait: sleep (5000ms) ... NiISelect: timeout 5000ms NiISelect: maximum fd=1465 NiISelect: read-mask is NULL NiISelect: write-mask is NULL Fri Dec 20 12:34:43 2013 NiISelect: TIMEOUT occured (5000ms) DpHalt: shutdown server >impvs42_SLM_00 < (normal) DpJ2eeDisableRestart DpModState: buffer in state MBUF_PREPARED NiBufSend starting NiIWrite: hdl 2 sent data (wrt=110,pac=1,MESG_IO) MsINiWrite: sent 110 bytes MsIModState: change state to SHUTDOWN DpModState: change server state from STARTING to SHUTDOWN Switch off Shared memory profiling ShmProtect( 57, 3 ) ShmProtect(SHM_PROFILE, SHM_PROT_RW ShmProtect( 57, 1 ) ShmProtect(SHM_PROFILE, SHM_PROT_RD DpWakeUpWps: wake up all wp's Stop work processes Stop gateway *** ERROR => DpProcKill: wrong pid (0) [dpntdisp.c 348] Stop icman *** ERROR => DpProcKill: wrong pid (0) [dpntdisp.c 348] Terminate gui connections wait for end of work processes wait for end of gateway wait for end of icman DpStartStopMsg: send stop message (myname is >impvs42_SLM_00 <) DpStartStopMsg: Write AD_STARTSTOP message with type= 0, name=impvs42_SLM_00 , sapsysnr= 0, hostname=impvs42 AdGetSelfIdentRecord: > < AdCvtRecToExt: opcode 60 (AD_SELFIDENT), ser 0, ex 0, errno 0 AdCvtRecToExt: opcode 4 (AD_STARTSTOP), ser 0, ex 0, errno 0 DpConvertRequest: net size = 189 bytes NiBufSend starting NiIWrite: hdl 2 sent data (wrt=562,pac=1,MESG_IO) MsINiWrite: sent 562 bytes send msg (len 110+452) to name -, type 4, key - DpStartStopMsg: stop msg sent NiIRead: hdl 2 received data (rcd=274,pac=1,MESG_IO) NiBufIIn: NIBUF len=274 NiBufIIn: packet complete for hdl 2 NiBufReceive starting MsINiRead: received 274 bytes MSG received, len 110+164, flag 1, from MSG_SERVER , typ 0, key - DpHalt: received 164 bytes from message server NiIRead: hdl 2 received data (rcd=274,pac=1,MESG_IO) NiBufIIn: NIBUF len=274 NiBufIIn: packet complete for hdl 2 NiBufReceive starting MsINiRead: received 274 bytes MSG received, len 110+164, flag 1, from MSG_SERVER , typ 0, key - DpHalt: received 164 bytes from message server NiIRead: hdl 2 received data (rcd=274,pac=1,MESG_IO) NiBufIIn: NIBUF len=274 NiBufIIn: packet complete for hdl 2 NiBufReceive starting MsINiRead: received 274 bytes MSG received, len 110+164, flag 1, from MSG_SERVER , typ 0, key - DpHalt: received 164 bytes from message server NiIRead: hdl 2 received data (rcd=274,pac=1,MESG_IO) NiBufIIn: NIBUF len=274 NiBufIIn: packet complete for hdl 2 NiBufReceive starting MsINiRead: received 274 bytes MSG received, len 110+164, flag 1, from MSG_SERVER , typ 0, key - DpHalt: received 164 bytes from message server NiIRead: hdl 2 received data (rcd=274,pac=1,MESG_IO) NiBufIIn: NIBUF len=274 NiBufIIn: packet complete for hdl 2 NiBufReceive starting MsINiRead: received 274 bytes MSG received, len 110+164, flag 1, from MSG_SERVER , typ 0, key - DpHalt: received 164 bytes from message server NiIRead: hdl 2 received data (rcd=274,pac=1,MESG_IO) NiBufIIn: NIBUF len=274 NiBufIIn: packet complete for hdl 2 NiBufReceive starting MsINiRead: received 274 bytes MSG received, len 110+164, flag 1, from MSG_SERVER , typ 0, key - DpHalt: received 164 bytes from message server NiIRead: hdl 2 received data (rcd=274,pac=1,MESG_IO) NiBufIIn: NIBUF len=274 NiBufIIn: packet complete for hdl 2 NiBufReceive starting MsINiRead: received 274 bytes MSG received, len 110+164, flag 1, from MSG_SERVER , typ 0, key - DpHalt: received 164 bytes from message server NiIRead: hdl 2 recv would block (errno=EAGAIN) NiIRead: read for hdl 2 timed out (0ms) DpHalt: no more messages from the message server DpHalt: send keepalive to synchronize with the message server NiBufSend starting NiIWrite: hdl 2 sent data (wrt=114,pac=1,MESG_IO) MsINiWrite: sent 114 bytes send msg (len 110+4) to name MSG_SERVER, type 0, key - MsSndName: MS_NOOP ok Send 4 bytes to MSG_SERVER NiIRead: hdl 2 received data (rcd=114,pac=1,MESG_IO) NiBufIIn: NIBUF len=114 NiBufIIn: packet complete for hdl 2 NiBufReceive starting MsINiRead: received 114 bytes MSG received, len 110+4, flag 3, from MSG_SERVER , typ 0, key - Received 4 bytes from MSG_SERVER Received opcode MS_NOOP from msg_server, reply MSOP_OK MsOpReceive: ok MsSendKeepalive : keepalive sent to message server NiIRead: hdl 2 recv would block (errno=EAGAIN) Fri Dec 20 12:34:44 2013 NiIPeek: peek for hdl 2 timed out (r; 1000ms) NiIRead: read for hdl 2 timed out (1000ms) DpHalt: no more messages from the message server DpHalt: sync with message server o.k. detach from message server ***LOG Q0M=> DpMsDetach, ms_detach () [dpxxdisp.c 13304] NiBufSend starting NiIWrite: hdl 2 sent data (wrt=110,pac=1,MESG_IO) MsINiWrite: sent 110 bytes MsIDetach: send logout to msg_server MsIDetach: call exit function DpMsShutdownHook called NiBufISelUpdate: new MODE -- (r-) for hdl 2 in set0 SiSelNSet: set events of sock 1464 to: --- NiBufISelRemove: remove hdl 2 from set0 SiSelNRemove: removed sock 1464 NiSelIRemove: removed hdl 2 MBUF state OFF AdGetSelfIdentRecord: > < AdCvtRecToExt: opcode 60 (AD_SELFIDENT), ser 0, ex 0, errno 0 AdCvtRecToExt: opcode 40 (AD_MSBUF), ser 0, ex 0, errno 0 AdCvtRecToExt: opcode 40 (AD_MSBUF), ser 0, ex 0, errno 0 blks_in_queue/wp_ca_blk_no/wp_max_no = 1/300/17 LOCK WP ca_blk 1 make DISP owner of wp_ca_blk 1 DpSemRq: key: 2, units: 1, timeout: -1 DpSemRel: key: 2, units: 1 DpRqPutIntoQueue: put request into queue (reqtype 1, prio LOW, rq_id 9) MBUF component DOWN NiICloseHandle: shutdown and close hdl 2 / sock 1464 NiBufIClose: clear extension for hdl 2 MsIDetach: detach MS-system cleanup EM EsCleanup .... EmCleanup() -> 0 Es2Cleanup: Cleanup ES2 ***LOG Q05=> DpHalt, DPStop ( 1316) [dpxxdisp.c 11473] Good Bye .....
I am happe for anyone who can help me :-)
If you need any more information, please let me know!
Regards,
Andreas