After upgrading new Solution Manager 7.1 to SP11 (via SUM) I have problems with
all web-based transactions such as solman_setup, soamanager.
HTTP ports Ok in general (nwa on 50000, 8000 ports can be reached).
- I get HTTP 500 error in brouser after calling web-based tr.
In SICF all services are ON. If make test appropriate services I get
500 SAP Internal Server Error
ERROR: Syntax error in program CL_WDR_CLIENT_SSR_LS==========CP . (termination: RABAX_u'oATE)
- I get dumps in st22 after web-based tr. starts (SYNTAX_ERROR in "CL_WDR_CLIENT_SSR_LS==========CP ". Text below)
- There are a lotof dumps SYNTAX_ERROR in CL_SISE_MNG_RFC_STATUS_HANDLERCP - text below
Could you give me advise??? (Info from WP log added)
- Besides i see several SNotes in "Incompletely implemented" status:
1815196
1821727
1850983
1861585
1879253
1882914
1888783
1890903
1894598
1899812
1902251
1903942
1906936
1906937
1909714
1912693
1914046
1935934
1970628
1972789
1981760
--------------------dump 1----------------------------------------
Category ABAP Programming Error
Runtime Errors SYNTAX_ERROR
ABAP Program CL_WDR_CLIENT_SSR_LS==========
Application Component BC-WD-ABA-REN
Short text
Syntax error in program "CL_WDR_CLIENT_SSR_LS==========CP ".
What happened?
Error in the ABAP Application Program
The current ABAP program "CL_WDR_CLIENT_ABSTRACT_HTTP===CP" had to be
terminated because it has come across a statement that unfortunately cannot be executed.
The following syntax error occurred in program
"CL_WDR_CLIENT_SSR_LS==========CP " in include
"CLUR_NW7_FACTORY==============CU " in
line 892:
...unknown field "INPUTFIELDTEXTSTYLE_ENUM".
The include has been created and last changed by:
Created by: "SAP "
Last changed by: "SAP "
Error in the ABAP Application Program
The current ABAP program "CL_WDR_CLIENT_ABSTRACT_HTTP===CP" had to be
terminated because it has
come across a statement that unfortunately cannot be executed.
Server-Side Connection Information
Information on Caller of "HTTP" Connection:
Plug-in Type.......... "HTTP"
Caller IP............. "#########"
Caller Port........... 8000
Universal Resource ID. "/sap/bc/webdynpro/sap/wd_sise_main_app"
Program............. "CL_WDR_CLIENT_ABSTRACT_HTTP===CP"
Screen.............. "SAPMHTTP 0010"
Screen Line......... 2
Information on Caller ofr "HTTP" Connection:
Plug-in Type.......... "HTTP"
Caller IP............. "############"
Caller Port........... 8000
Universal Resource Id. "/sap/bc/webdynpro/sap/wd_sise_main_app"
Information on where terminated
Termination occurred in the ABAP program "CL_WDR_CLIENT_ABSTRACT_HTTP===CP" -
in "CLIENT_INSPECTOR_CREATE_CLIENT".
The main program was "SAPMHTTP ".
In the source code you have the termination point in line 19
of the (Include) program "CL_WDR_CLIENT_ABSTRACT_HTTP===CM01C".
Source Code Extract
Line SourceCde
1 method client_inspector_create_client.
2
3 data:
4 name type string,
5 user_agent type string.
6
7 cl_wdr_client_abstract_http=>m_appl_props_tmp = get_appl_props( rr_application = applicati
8
9 name = wdr_task=>client_window->framework_parameters->client_name_key.
10 translate name to lower case.
11
12 user_agent = wdr_task=>request->get_header_field( if_http_header_fields=>user_agent ).
13 if user_agent cs 'SAP-NW' and name is initial.
14 name = 'smartclient'.
15 endif.
16
17 case name.
18 when '' or 'ssrclient' or 'htmlclient'.
>>>>> CREATE OBJECT client type ('CL_WDR_CLIENT_SSR_LS')
20 EXPORTING
21 client_info_object = client_info_object.
22 when 'smartclient' or 'smartclient-new' or 'smartclient-old'. " new smart client imp
23 if cl_wdr_client_abstract_http=>m_appl_props_tmp-enable_xbcml_client = abap_true.
24 CREATE OBJECT client type ('CL_WDR_CLIENT_SMART_NEW')
25 EXPORTING
26 client_info_object = client_info_object
27 application_info = application.
28 else.
29 message e026(webdynpro_rt) with name.
30 endif.
31 when others.
32 message e018(webdynpro_rt) with name.
33 endcase.
34
35 data: client_fulfills type abap_bool.
36 client_fulfills = client->if_wdr_client~fulfills( ).
37
38 if client_fulfills = abap_false or client_fulfills = '-' and application->get_property( if
------------------ from WP log ------------------------
Sun Apr 13 19:30:09 2014
*GENER* request remote generation: CL_WDR_CLIENT_SSR_LS==========CP.
Sun Apr 13 19:30:11 2014
*** ERROR => Syntax error in program CL_WDR_CLIENT_SSR_LS==========CP [abgen.c 1828]
{root-id=0050568147F11ED3B0E40FE685FAC4C2}_{conn-id=0050568147F11ED3B0E40FE6846364C2}_1
*** ERROR => > Include CLUR_NW7_FACTORY==============CU line 892 [abgen.c 1830]
{root-id=0050568147F11ED3B0E40FE685FAC4C2}_{conn-id=0050568147F11ED3B0E40FE6846364C2}_1
*** ERROR => > Неизвестное поле "INPUTFIELDTEXTSTYLE_ENUM". Но существуют следующие поля с подо [abgen.c 1832]
{root-id=0050568147F11ED3B0E40FE685FAC4C2}_{conn-id=0050568147F11ED3B0E40FE6846364C2}_1
*** ERROR => > бными именами: "INPUTFIELDTYPE_ENUM", "INPUTFIELDFIELDHELP_ENUM" и "INPUTFIELDSI [abgen.c 1834]
{root-id=0050568147F11ED3B0E40FE685FAC4C2}_{conn-id=0050568147F11ED3B0E40FE6846364C2}_1
*** ERROR => > ZE_ENUM". [abgen.c 1836]
{root-id=0050568147F11ED3B0E40FE685FAC4C2}_{conn-id=0050568147F11ED3B0E40FE6846364C2}_1
TH VERBOSE LEVEL FULL
** RABAX: level LEV_RX_PXA_RELEASE_MTX entered.
** RABAX: level LEV_RX_PXA_RELEASE_MTX completed.
** RABAX: level LEV_RX_COVERAGE_ANALYSER entered.
** RABAX: level LEV_RX_COVERAGE_ANALYSER completed.
** RABAX: level LEV_RX_HOTSPOT_TRACE entered.
** RABAX: level LEV_RX_HOTSPOT_TRACE completed.
** RABAX: level LEV_RX_SAVE_SHMLOCKS entered.
** RABAX: level LEV_RX_SAVE_SHMLOCKS completed.
** RABAX: level LEV_RX_RESET_SHMLOCKS entered.
** RABAX: level LEV_RX_RESET_SHMLOCKS completed.
** RABAX: level LEV_RX_ROLLBACK entered.
** RABAX: level LEV_RX_ROLLBACK completed.
** RABAX: level LEV_RX_DB_ALIVE entered.
** RABAX: level LEV_RX_DB_ALIVE completed.
** RABAX: level LEV_RX_HOOKS entered.
*** ERROR => SemRel: Inv. Operation. Units 1. Key=51 [semux.c 1393]
I {root-id=#######}_{conn-id=0050568147F11ED3B0E40FE6846364C2}_1
A ** RABAX: level LEV_RX_HOOKS completed.
A ** RABAX: level LEV_RX_STANDARD entered.
A ** RABAX: level LEV_RX_STANDARD completed.
A ** RABAX: level LEV_RX_STOR_VALUES entered.
A ** RABAX: level LEV_RX_STOR_VALUES completed.
A ** RABAX: level LEV_RX_C_STACK entered.
-------------------dump 2------------------------------
Category ABAP Programming Error
Runtime Errors SYNTAX_ERROR
ABAP Program CL_SISE_MNG_RFC_STATUS_HANDLERCP
Application Component SV-SMG-INS-CFG
Short text
Syntax error in program "CL_SISE_MNG_RFC_STATUS_HANDLERCP ".
hat happened?
Error in the ABAP Application Program
The current ABAP program "CL_DIAGLS_STATUS_MANAGER======CP" had to be
terminated because it has
come across a statement that unfortunately cannot be executed.
The following syntax error occurred in program
"CL_SISE_MNG_RFC_STATUS_HANDLERCP " in include
"CL_SISE_MNG_RFC_STATUS_HANDLERCM003 " in
line 56:
Formal paramet "HAS_BACK_OK" does not exist
" "
" "
" "
The include has been created and last changed by:
Created by: "SAP "
Last changed by: !!! ME !!!!!
Error in the ABAP Application Program
The current ABAP program "CL_DIAGLS_STATUS_MANAGER======CP" had to be
terminated because it has
come across a statement that unfortunately cannot be executed.
Information on where terminated
Termination occurred in the ABAP program "CL_DIAGLS_STATUS_MANAGER======CP" -
in "CLASS_CONSTRUCTOR".
The main program was "SAPMSSY1 ".
In the source code you have the termination point in line 28
of the (Include) program "CL_DIAGLS_STATUS_MANAGER======CM001".
Source Code Extract
Line SourceCde
1 method class_constructor.
2 data:
3 lr_de_physical_host type ref to cl_diagls_de_host_status_hndlr,
4 lr_de_database type ref to cl_diagls_de_db_status_hndlr,
5 lr_tech_syst_def type ref to cl_diagls_tech_syst_definition,
6 lr_robomate_rfc_gen_status type ref to cl_sise_mng_rfc_status_handler,
7 lr_robomate_diag_conf_status type ref to cl_sise_mng_diag_statushandler,
8 lr_robomate_plugin_status type ref to cl_sise_mng_plugin_statushandl,
9 lr_robomate_def_changed_status type ref to cl_sise_mng_def_changed_status,
10 lr_ccdb_status type ref to cl_diagst_ts_store_status,
11 lr_selfcheck_status type ref to cl_diagls_selfcheck_status,
12 lr_logviewer_status type ref to cl_diagst_ts_logviewer_status,
13 lr_bi_reporting_status type ref to cl_e2erep_ts_status_handler,
14 lr_monitoring_status type ref to cl_mai_rep_mo_status_handler,
15 lr_template_status type ref to cl_mai_rep_template_status,
16 lr_tech_managed_status type ref to CL_SISE_MNG_DEF_CHANGED_STATUS.
17
18 " REGISTER THE CHECKS HERE
19 " LANDSCAPE =================================================
20 create object lr_de_physical_host.
21 append lr_de_physical_host to mt_status_handlers.
22
23 " LANDSCAPE =================================================
24 create object lr_tech_syst_def.
25 append lr_tech_syst_def to mt_status_handlers.
26
27 " ROBOMATE: RFC GENERATED =================================================
>>>>> create object lr_robomate_rfc_gen_status.
29 append lr_robomate_rfc_gen_status to mt_status_handlers.
30
31 " ROBOMATE: DIAGNOSTICS CONFIGURED =================================================
32 create object lr_robomate_diag_conf_status.
33 append lr_robomate_diag_conf_status to mt_status_handlers.
34
35 " ROBOMATE: PLUGIN STATUS (ST PI & ST A/PI) ============================================
36 create object lr_robomate_plugin_status.
37 append lr_robomate_plugin_status to mt_status_handlers.
38
39 " Database =================================================
40 create object lr_de_database.
41 append lr_de_database to mt_status_handlers.
42
43 " SelfCheck status =================================================
44 create object lr_selfcheck_status.
45 " This status has
46 " append lr_selfcheck_status to mt_status_handlers.
------------------------form WP log --------------------------------------------
A Sun Apr 13 19:44:10 2014
A *GENER* request remote generation: CL_SISE_MNG_RFC_STATUS_HANDLERCP.
A *** ERROR => Syntax error in program CL_SISE_MNG_RFC_STATUS_HANDLERCP [abgen.c 1828]
A {root-id=744CD8DDC32211E390060000001904E2}_{conn-id=28365B90C29A11E388B2C4420A147023}_1
A *** ERROR => > Include CL_SISE_MNG_RFC_STATUS_HANDLERCM003 line 56 [abgen.c 1830]
A {root-id=744CD8DDC32211E390060000001904E2}_{conn-id=28365B90C29A11E388B2C4420A147023}_1
A *** ERROR => > Формальный параметр "HAS_BACK_OK" не существует [abgen.c 1832]
A {root-id=744CD8DDC32211E390060000001904E2}_{conn-id=28365B90C29A11E388B2C4420A147023}_1
A TH VERBOSE LEVEL FULL
A ** RABAX: level LEV_RX_PXA_RELEASE_MTX entered.
A ** RABAX: level LEV_RX_PXA_RELEASE_MTX completed.
A ** RABAX: level LEV_RX_COVERAGE_ANALYSER entered.
A ** RABAX: level LEV_RX_COVERAGE_ANALYSER completed.
A ** RABAX: level LEV_RX_HOTSPOT_TRACE entered.
A ** RABAX: level LEV_RX_HOTSPOT_TRACE completed.
A ** RABAX: level LEV_RX_SAVE_SHMLOCKS entered.
A ** RABAX: level LEV_RX_SAVE_SHMLOCKS completed.
A ** RABAX: level LEV_RX_RESET_SHMLOCKS entered.
A ** RABAX: level LEV_RX_RESET_SHMLOCKS completed.
A ** RABAX: level LEV_RX_ROLLBACK entered.
A ** RABAX: level LEV_RX_ROLLBACK completed.
A ** RABAX: level LEV_RX_DB_ALIVE entered.
A ** RABAX: level LEV_RX_DB_ALIVE completed.
A ** RABAX: level LEV_RX_HOOKS entered.
I *** ERROR => SemRel: Inv. Operation. Units 1. Key=51 [semux.c 1393]
I {root-id=744CD8DDC32211E390060000001904E2}_{conn-id=28365B90C29A11E388B2C4420A147023}_1
A ** RABAX: level LEV_RX_HOOKS completed.
A ** RABAX: level LEV_RX_STANDARD entered.
A ** RABAX: level LEV_RX_STANDARD completed.
A ** RABAX: level LEV_RX_STOR_VALUES entered.
A ** RABAX: level LEV_RX_STOR_VALUES completed.
A ** RABAX: level LEV_RX_C_STACK entered.